SOLIDWORKS World 2015 is announced! 

Check it out. This is a great place for SOLIDWORKS engineers and designers to network. http://www.video-tutorials.net/vtnet/solidworks-world/

Thanks! Rosanna D, VTN - www.video-tutorials.net

SOLIDWORKS Surface Design Basics - the power of the fillet!

http://www.video-tutorials.net/vtnet/solidworks-basic-surface-design/
Hi there! Check out this article in the Surface Design basics series. Think you need to be a pro to make something look good? Think again!
Thanks, Rosanna D - www.video-tutorials.net

SOLIDWORKS Surface Design Tutorials - apply the surface fillet

http://www.video-tutorials.net/vtnet/solidworks-surface-design-tutorials-2/

Here's a new video just posted from my SOLIDWORKS surface design tutorials course - teaches you how to apply a surface fillet.

Thanks! Rosanna D  www.video-tutorials.net

Uh, oops! Will re-output my last few youtube videos!

Uh, oops; in my last 5 videos I messed up the encoding during output and didn't embed the audio; so sorry. I'll repost these videos when I reoutput them. The full found fillet & variable radius fillet in SOLIDWORKs, working with missing components in SOLIDWORKS toolbox (parts 1-3) and AutoCAD templates.
Sorry! thanks for your patience :)  Rosanna - VTN   www.video-tutorials.net

How to simplify your work & increase productivity by using templates in AutoCAD - AutoCAD video tutorials (templates)

AutoCAD Video Tutorials: Templates  -simplify your work by using templates.

http://www.video-tutorials.net/vtnet/autocad-video-tutorials-templates/

Simplify your work with AutoCAD - when you know the interface and the tricks, you can work a lot faster - check out how to work with templates in AutoCAD. Thanks!
Rosanna D, VTN - don't forget to enter 'july' during checkout to save 20%!!
www.video-tutorials.net

Fillets #2 - The full round fillet - SOLIDWORKS Beginner Training

 Fillets #2 - The full round fillet - SOLIDWORKS Beginner Training

http://www.video-tutorials.net/vtnet/solidworks-beginner-training-fillets/

Here's another one of the fillet how-to videos from the SOLIDWORKS beginner training series.
Thanks! Rosanna D, VTN - www.video-tutorials.net

Variable Radius Fillet - SOLIDWORKS basics videos...

SOLIDWORKS basics videos - More Fillets - the Variable Radius Fillet

http://www.video-tutorials.net/vtnet/solidworks-basics-fillets2/
Here's another video from the SOLIDWORKS basics training series.
Don't forget to save 20% all of July with coupon code "july" during checkout.

Thanks,
Rosanna D, www.video-tutorials.net

Help video

Hi--here is a help video for viewing my downloads/discs...
http://www.video-tutorials.net/vtnet/help/

Thanks! Rosanna D, VTN

SOLIDWORKS 2015 Beta is out!

SOLIDWORKS 2015 Beta is Out!

Hi everyone; just a quick post to let you know that SOLIDWORKS 2015 Beta is now out; for some FAQ from SOLIDWORKS please check here:
http://www.video-tutorials.net/vtnet/solidworks-2015-beta/
Thanks!
Rosanna D, VTN - www.video-tutorials.net

SOLIDWORKS ToolBox Video Playlist

ToolBox Video Playlist - SOLIDWORKS tutorials for beginners

Hiya: here's the complete playlist for the SOLIDWORKS toolbox course; I'll be adding a few more videos to it.

SOLIDWORKS ToolBox Video Playlist

Thanks! Rosanna D, www.video-tutorials.net

ToolBox Browser (SOLIDWORKS Tutorials) – part 3

 ToolBox Browser - SolidWorks Tutorials for Beginners - Part 3

Hi again. I'm actually watching 3 Days to Kill with Kevin Costner whilst creating some blog entries for www.video-tutorials.net... and here is the third installment of How to Use the ToolBox Browser - enjoy!



ToolBox Browser (SOLIDWORKS Tutorials) – part 3



Kind regards,

Rosanna D, VTN - www.video-tutorials.net

Don't forget to enter "july" during checkout to save 20% on all courses!!

SOLIDWORKS ToolBox Browser Tutorials – part 1

SOLIDWORKS ToolBox  - Browser Part 1

 Hi there- in this series of 3 videos, I show you how to use the ToolBox browser.

SOLIDWORKS ToolBox Browser Tutorials – part 1



Thanks! Rosanna D, VTN  www.video-tutorials.net 

SOLIDWORKS ToolBox tutorials – Adding in ToolBox

 After a long hiatus to write AutoDesk Inventor courseware, I'm coming back to my fav ole SOLIDWORKS! Check out my tutorial about adding in ToolBox, the next in my SOLIDWORKS tutorials for Beginners series. Enjoy, and don't forget my July sale, of 20% (enter "july" at checkout.



SOLIDWORKS ToolBox tutorials – Adding in ToolBox



SOLIDWORKS ToolBox Tutorial Course by Video-Tutorials.Net

AutoDesk Inventor Training – Inventor Studio – Migrate Data part 4. Last part!

AutoDesk Inventor Training – Inventor Studio – Migrate Data part 4. Last part!

Migrate Data pt 3 – AutoDesk Inventor Tutorials (Inventor Studio)

 AutoDesk Inventor Tutorials - Inventor Studio

 Here's part three of the tutorial where I show you how to migrate your appearance and materials data from an older version of Inventor to a current version of AutoDesk Inventor.  Thanks!

Migrate Data pt 3 – AutoDesk Inventor Tutorials (Inventor Studio)

Migrate Data pt 2 – AutoDesk Inventor Video Tutorials (Inventor Studio)

Migrate Data pt 2 – AutoDesk Inventor Video Tutorials (Inventor Studio)



Hi there - here is part two of this AutoDesk Inventor Video Tutorial, where I teach you to migrate appearance and material data from a previous version of Inventor to your current version.



Thanks! Rosanna D, www.video-tutorials.net

Migrate Data, part 1 – AutoDesk Inventor Studio Video Tutorials

Migrate Data, part 1 – AutoDesk Inventor Studio Video Tutorials

Hi there; here's another Inventor tutorial - how to migrate appearance and material data from one version of Inventor to another...

Thanks! Rosanna D, www.video-tutorials.net



 

https://www.youtube.com/watch?v=eLqMC6Neob8&feature=youtu.be







 

More on Viso / Broadband TV network - Don't use this MCN

Hi--just an update on my dealings with this YouTube MCN - here is their website:
http://bbtv.com/

If you are thinking of contracting with the, do not! Your income will end up going down significantly, and they don't do anything to help you or to make the analysis clear. Definitely a big scam. 

Thanks,
Rosanna D

The Grid pt 3 - AutoDesk Inventor Tutorials for Beginners

Hi again--and here is the 3rd part of this article on working with the AutoDesk Inventor grid lines and snap functionality. Enjoy!

http://www.video-tutorials.net/vtnet/autodesk-inventor-tutorials-grid03/

Thannks! Rosanna D, Video-Tutorials.net
For our complete library of AutoDesk Inventor Video Tutorials, please visit the Platinum package page at our site!

The Grid (part 2 of 3) AutoDesk Inventor Tutorials for Beginners

Hi,
Here is part two of three, on manipulating grid lines and working with the snap functionality of AutoDesk Inventor.
http://www.video-tutorials.net/vtnet/autodesk-inventor-tutorials-grid2/

Don't forget...save 20% on all tutorials during the month of July! Enter "july" during checkout.
Thanks!
Rosanna D, www.video-tutorials.net

AutoDesk Inventor Tutorials for beginners series - The Grid, part 1

Hi there, welcome back. I've just published part 1 of another article in the AutoDesk Inventor Tutorials for beginners series. This one teaches you how to work the grid and work with the snap functionality in Inventor. Enjoy!
http://www.video-tutorials.net/vtnet/autodesk-inventor-tutorials-grid1/

Rosanna D, VTN
www.video-tutorials.net

AutoDesk Inventor Training - Sheet Metal - part 3 (introduction)

 AutoDesk Inventor Training on Sheet Metal - part 3 

Introduction to working with Sheet Metal in AutoDesk Inventor

 And here is part 3 of this series introducing you to working with Sheet Metal in AutoDesk Inventor. Don't forget to enter "july" in our shopping cart to save 20% on all video tutorials. Thanks!
http://www.video-tutorials.net/vtnet/autodesk-inventor-training-sheet-metal/

Rosanna, VTN
www.video-tutorials.net

Introduction to working with Sheet Metal - AutoDesk inventor - part 2

Introduction to working with Sheet Metal - AutoDesk inventor - part 2

by video-tutorials.net

Here is the link to part 2, thx!
http://www.video-tutorials.net/vtnet/sheet-metal-autodesk-inventor-tutorials/

Don't forget to enter "july" in our shopping cart to save 20%
:) rosanna  VTN

Getting started in AutoDesk Inventor Sheet Metal

Getting started in AutoDesk Inventor Sheet Metal - Inventor 2014 Video Tutorials

Hi--here's my new blog entry about getting started in Sheet Metal; this is part 1. Stay tuned for Part 2.
Thanks!
Rosanna D, www.video-tutorials.net

http://www.video-tutorials.net/vtnet/sheet-metal-autodesk-inventor-video-tutorials/
Getting Started with Sheet Metal Design - AutoDesk Inventor 2014 Video Tutorials

*****************
don't forget to enter "july" @ checkout to save 20% on all courses
disc, download & online streaming.

Inventor 2014 Sheet Metal - youtube playlist

https://www.youtube.com/playlist?list=PLx-VY2mDlK2GxztfldvlGnksvjXF2K0pL

New playlist for Inventor 2014 Sheet Metal just posted! 

Thanks,
Rosanna D - www.video-tutorials.net 

Inventor 2014 Sheet Metal, Inventor 2014 Studio

Hi--just a quick note that the AutoDesk Inventor 2014 Sheet Metal and AutoDesk Inventor 2014 Studio courses are now available!

Hope everyone had a super fourth.

Check them out:
http://www.video-tutorials.net/vtnet/shop/inventor-video-tutorials/autodesk-inventor-tutorial-sheet-metal/

http://www.video-tutorials.net/vtnet/shop/inventor-video-tutorials/autodesk-inventor-tutorial-studio/

I'll update this post when I put up the playlists on youtube.  (www.youtube.com/videotutorials2)
Thanks! Rosanna D, VTN   www.video-tutorials.net

CATIA beginner training - Basic Sketch Profiles

 CATIA Training for Beginners - basic sketch profiles

 Welcome back--check out my latest entry about CATIA training for beginners - I talk about working with some of the basic sketch profiles like elongated circles (slots) and parallellograms etc.

http://www.video-tutorials.net/vtnet/catia-beginner-training/

CATIA VIDEO TUTORIAL PLAYLIST by Video-TUTORIALS.net

Thanks!
Rosanna D, VTN  www.video-tutorials.net

How to work with Shut Off Surfaces - SOLIDWORKS Training Mold Design

Working with the Shut Off Surfaces tool - SOLIDWORKS Training (Mold Design)

Check out my last entry at my blog...
http://www.video-tutorials.net/vtnet/solidworks-training-mold-design/

Thanks! Rosanna D, VTN  www.video-tutorials.net

Fourth of July Savings Blowout! Save 40% on all courses.

For 24 hours only, buy any courses in our cart and save a whopping 40% Sale starts and ends on July 4, 2014.
Happy Fourth of July, America!

code: fourthofjuly
www.video-tutorials.net

AutoCAD tutorials for beginners - how to work with palettes?

AutoCAD Tutorials for beginners: working with palettes

Just answering a quick user question about how to work with palettes in AutoCAD. In a nutshell, it works as described below:  First thing you’ll need to do is right click in blank space in the graphic area and scroll a bit to deselect everything. Now, you can go to the View tab and click the Properties tool. If for some reason you don’t see this tool, scroll over to Show Panels and ensure that Palettes is checked.

Once the palette is enabled, you can grab it and drag it. A palette is kind of just what it sounds like; a free floating “plate” of tools that you can move around as you see fit. Click the Properties icon. You see that we can resize the palette left to right or up and down. You can easily close the palette by clicking the close icon in the upper right corner. There’s also an auto hide toggle, so that when you mouse over the palette it appears, but when you mouse away, it collapses automatically. This helps free up some of your screen space for drawing, of course!

Click on the auto-hide button again to toggle off auto-hide mode. Now, the palette will stay visible even when you mouse away from it. If you want to dock the palette you can very easily. Just right click, and select, for example, Anchor Left. You can also Anchor Right, Anchor Top and Anchor Bottom. When the palette is docked, you can mouse over it to extend it out, and mouse away to collapse it. The palette can also be minimized to the icon level. 

Thanks! I hope this answers your question about working with palettes in AutoCAD. For more information about AutoCAD, please visit our website at www.video-tutorials.net.  

Here is a link to my new AutoCAD 2014 Video training; it's a very large and comprehensive training bundle, and it comes via online streaming, download, and disc shipped worldwide if you need one. Yes, we even ship to Bangladesh, Pakistan and Nigeria!

AutoCAD 2014 Video Tutorials - http://www.video-tutorials.net/vtnet/shop/autocad-video-tutorials/autocad-video-tutorials-2014/

This course is about 15 hours long, and has 300 video tutorials. There is a lot of material here, excellent quality, narrated by yours truly, and with part files for practice. Enjoy!

Don't forget to enter "july" in the shopping cart to save 20% on all video training. No need to estivate without learning "summthing" over the summer! 

Here's a link to some of my AutoCAD playlists on YouTube:
https://www.youtube.com/playlist?list=PLx-VY2mDlK2GNtcL0Y7qSBcDlL9wkTvA-
Free AutoCAD Tutorials on YouTube

Thanks,
Rosanna D, Video-Tutorials.net

SOLIDWORKS 2014 - Weldments - new video

http://youtu.be/ItrGRBHJUZ8
Here's a video from my SOLIDWORKS weldments course - Insert a part.
Kind regards,
Rosanna D, VTN
www.video-tutorials.net

Canada Day Special - save 25% - enter "canada" at checkout.

Hi--save 25% on all video courses until July 2, 2014 midnight - Canada Day Special - Happy Canada Day!
Kind regards,
Rosanna D, VTN
www.video-tutorials.net

Simulation Xpress Basics - new video playlist (SOLIDWORKS 2014 video tutorials)

Hi--here's a few videos about how to use Simulation Xpress in SOLIDWORKS 2014 - this is a simple to use stress analysis tool - check them out!

Simulation Xpress Part 1 by Video-Tutorials.Net   http://youtu.be/P59iPxSTFCs
Simulation Xpress Part 2 by Video-Tutorials.Net- http://youtu.be/s4cou0KFPWo
Simulation Xpress Part 3 by Video-Tutorials.Net - http://youtu.be/5j2mVzp9q8A

Here's the link to our simulation course at www.Video-Tutorials.Net: 
http://www.video-tutorials.net/vtnet/shop/solidworks-video-tutorials/solidworks-video-tutorial-simulation/
9 video tutorials - only $24.99
Enter "youtube" to save 10%

Thanks!
Rosanna D - www.video-tutorials.net